bitcoin.conf - Where is the configuration file of Bitcoin

IdealCash

IdealCash deal coin is a Decentralized Digital Currency based on an Open-Source Peer-To-Peer Internet Protocol. It provides Proof-of-Stake (PoS) Block Generation Methods with separated target limits, granting everyone a 30% floating coin return rate! Also, transaction fee’s are extremely low, it’s only 0.0001 to transfer 10000000.00 coins!
[link]

bitcoindark

[link]

Where is the bitcoin.conf file stored on Windows?

When running bitcoin-qt.exe for the first time where are the files supposed to be stored?
submitted by LightShadow to BitcoinABC [link] [comments]

Where is the bitcoin.conf file stored on Windows? /r/BitcoinABC

Where is the bitcoin.conf file stored on Windows? /BitcoinABC submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Where is bitcoin.conf file on Windows 0.11.0 install?

I want to add the commands to restrict transaction flooding for my node. But I can't find this file, nor where I should put it (if it is I need to create it).
submitted by allgoodthings1 to Bitcoin [link] [comments]

When BTC moon rockets stuck at launch pad again and again. Bitcoin Cash have created a whole new world waiting for us. I paid BCH and get my digital content every 10 seconds. No registration, no more waiting, only enjoying your purchase. This is real P2P electronic cash Satoshi expecting

When BTC moon rockets stuck at launch pad again and again. Bitcoin Cash have created a whole new world waiting for us. I paid BCH and get my digital content every 10 seconds. No registration, no more waiting, only enjoying your purchase. This is real P2P electronic cash Satoshi expecting

Instant Buy Continuously
This is not a visual special effects. This is real P2P digital cash use-case. Like using physical cash, we paid with cash then we got commodities. No more hassles.
I have created a digital P2P market which allows creators selling their digital artworks without registration and high service-fee, and peoples can buy what they want item by item. No registration, no subscription, no personal information required. Pick the images, music, video, documents and file you love, then buy it and download it. That's all.
Let's see more examples:Buy images https://youtu.be/6my6CeFUzzs https://wall.cash/List-Image
Buy Video https://youtu.be/SPYLDzMcYno https://wall.cash/List-Video
Buy Music https://youtu.be/5lw--YcQmC0 https://wall.cash/List-Music
Buy Document https://youtu.be/HgKf-iEADOI https://wall.cash/CashPort-314
You can check it by yourself.
It releases the power of real P2P electronic cash, such as instantly 0-conf purchase, https://bitcointalk.org/index.php?topic=423.msg3836#msg3836 small casual payment, https://bitcoin.org/bitcoin.pdf peer-to-peer, worldwide and more~
This website, CashBay, is still under testing, if you are interested you can check it at http://cashbay.cash/ or https://wall.cash/ However, there will be bugs I still need to fix them all.
The Pizza Day is coming, I will officially launch CashBay on Pizza Day, the day make Bitcoin as Cash. More innovative features of CashBay, such as PayWindow and CamCashifier are comming. Please wait and see.
Disclaimer: The demo videos are from Bitcoin.com. The receiving address is controlled by Bitcoin.com used for CashFusion Security Audit Fund. If you paid, your BCH will go directly to Bitcoin.com.
submitted by DiemosChen to btc [link] [comments]

Connecting Eclair to Bitcoin Core | Code: -5 error

Hello
I am having trouble getting eclair to connect to my full node.
im running eclair 0.3.4 and bitcoin core 0.19.1 (i was running 0.19.01 but updated when i saw the "Current number of transactions" said N/A in the information window)
I launch eclair-node-gui while bitcoin core is running (core is synced and has been running for an hour so mempool will be filled)
Core says transactions are about 6k and memory usage is ~12MB
However, I get error code: -5 on eclair:
Error: NO such mempool transaction. Blockchain transactions are still in the process of being indexed. Use gettransaction for wallet transactions.
I have txindex=1 in the conf of core. ( can show my configs if it helps, i got them right from the gethub)
I entered gettransaction into the core Console but im not sure if it really does anything
https://imgur.com/a/P39yIFU
Im not a coder by any means, so bear with me. Also when i updated Bitcoin Core from 0.19.01 to 0.19.1, i ran the setup exe downloaded from bitcoin.org and it recognized and is using the blocks destination folder that 0.19.01 was running off of, if that makes a difference.
I also posted this in lightningnetwork
Thanks!
submitted by wumbis to Bitcoin [link] [comments]

Connecting Eclair to Bitcoin Core | Code: -5 error

Hello
I am having trouble getting eclair to connect to my full node.
im running eclair 0.3.4 and bitcoin core 0.19.1 (i was running 0.19.01 but updated when i saw the "Current number of transactions" said N/A in the information window)
I launch eclair-node-gui while bitcoin core is running (core is synced and has been running for an hour so mempool will be filled)
Core says transactions are about 6k and memory usage is ~12MB
However, I get error code: -5 on eclair:
Error: NO such mempool transaction. Blockchain transactions are still in the process of being indexed. Use gettransaction for wallet transactions.
Couldnt find any info on this in the eclair gethub
I have txindex=1 in the conf of core. ( can show my configs if it helps, i got them right from the gethub)
I entered gettransaction into the core Console but im not sure if it really does anything
https://imgur.com/a/P39yIFU
Im not a coder by any means, so bear with me. Also when i updated Bitcoin Core from 0.19.01 to 0.19.1, i ran the setup exe downloaded from bitcoin.org and it recognized and is using the blocks destination folder that 0.19.01 was running off of, if that makes a difference.
If there is somewhere better for this post please let me know. I also posted on bitcoin
Thanks!
submitted by wumbis to lightningnetwork [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Electroneum Mining Earn up to $50 a day on your mobile

While Bitcoin and Ethereum mining is not expensive and not very profitable for regular users, there are a wide variety of cryptocurrencies that offer an alternative. There is nothing simpler than Electroneum mining and it guarantees money.
What is Electroneum?
Electroneum (ETN) is an anonymous cryptocurrency that runs on the blockchain and is based on the Bytecoin cryptocurrency blockchain. Electroneum cryptocurrency was launched in 2017 by a team of developers at the head of Richard Ells: he wanted to create a cryptocurrency for the smartphone market and games and apps running on these devices. In 2017, the team organized an ICO (they collected $ 40 million earlier than planned) and launched iOS and Android apps for ETN mining.
An important feature of Electroneum is its availability and simplicity of counting. Most Bitcoin owners don’t really like that an asset consists of 100,000,000 satoshi — it complicates the calculations. Electroneum uses only two digits after the separator: Instead of “0.089151 BTC” you will see only 21.45 ETN.
Electroneum has what it takes to be a viable alternative to Bitcoin. Some of the features worth mentioning are:
.The transaction speed and security of the coins are as good as Bitcoin (and some even claim that Electroneum is safer). .It can be stored both in the cloud and in offline wallets. .The development team is impressive. The company consists of professional engineers, entrepreneurs and marketers. .It can be easily removed on a smartphone or other device.
In short, although Electroneum is based on its own chain, it has a lot in common with Bitcoin.
Is Electroneum Mining Profitable?
Electroneum cryptocurrency mining is very simple and affordable: those who don’t even have powerful computers can handle it. You can even use Electroneum on the background of the computer. But there is another distinctive point like below. Since Electroneum was created for use by smartphones, you can mining using your mobile phone.This is the most preferred and easiest
How to make Electroneum mining?
Many crypto owners believe that it is better to mine alone without a pool, but beginners are strongly recommended to start cryptocurrency mining with other participants. Pools allow you to receive payments every day, and Electroneum is supported by many platforms that differ in their commissions and reliability.
Electroneum Mining on Mobile Devices (Android and iOS)
You can earn Electroneum using your mobile phone. Follow these steps to install the app and register as a user:
(https://miro.medium.com/max/2871/1*iW72ofy33FzsOefJuJzcEg.jpeg)
“Download” Barcode reader from this link.
After installing the Barcode reader application on your phone, scan the barcode on the left side
Enter the Code when register the application: D65C7C
Check your email address to find an activation link
Enter your mobile phone. Enter the received SMS code in the field on the registration page.
If you lose your account PIN, enter an alternate email address where you can send recovery information.
Enter your PIN. You will need this every time you start the application or send a transaction.
Return to your inbox and click the link in the letter sent to you. This confirms that you have received a PIN recovery email. You can now enter the application.
This much. All you have to do is click the “Start mining” button.
You started making money
while mining phone
Electroneum Mining on Windows and Mac
Use xmr-stak-cpu software for Electroneum mining on CPU: Claymore provides a higher hash than CPU. The CPU version of this software is available from GitHub.
Download and then open the “config” file via any text editor. You should find the following lines in the text editor:
“Pool_address”: “pool.usxmrpool.com//333” “Wallet_address”: “ “Pool_password”: “
They need to be replaced:
“Pool_address”: “layer + ssl: / /etn-eu1.nanopool.org:13433” “wallet_address”: “Your ETN wallet address” “Pool_password”: “x”
Then look for the line:
“Cpu_threads_conf”: null,
And replace it with the following lines:
“Cpu_threads_conf”: [ {“Low_power_mode”: false, “no_prefetch”: true, “affine_to_cpu”: 0} {“Low_power_mode”: false, “no_prefetch”: true, “affine_to_cpu”: 1} {“low_power_mode”: false, “No_prefetch: true,” affine_to_cpu “: 2} {“ low_power_mode “: false,” no_prefetch “: true, “Affine_to_cpu”: 3} {“low_power_mode”: false, “no_prefetch”: true, “affine_to_cpu”: 3} {“low_power_mode”: false, “no_prefetch”: true, “affine_to_cpu”: 4} {“Low_power_mode”: false , “No_prefetch”: true, “affine_to_cpu”: 5},],
Each line connects the processor core separately. For example, if you have a 6-core processor, you can connect five cores and leave one for work. It is important that the first line starts from zero. Register and run the software.
Alternatively, you can try Electroneum mining GPU — there are both AMD and Nvidia options, but it means buying expensive graphics cards. The reward for a mined block is 7,000 ETN, which is quite generous. But is GPU mining worth the investment? You can check the profitability of electroneum mining here
summary
Electroneum mining is a simple and energy efficient way to earn ETN tokens. If you’re new to crypto mining, consider starting your experience with this coin — having some ETN coins in your crypto portfolio will never hurt.
Since it is a mobile-centric cryptocurrency, you can install Electroneum application on your smartphone and continue mining with a single click every day. This is a small source of passive income. Also, don’t forget to join an Electroneum mining rig.
submitted by tolga1500 to u/tolga1500 [link] [comments]

I found a $600k BCH theft that has gone unnoticed

Hello all, I'm (among other things) a graduate student getting a master's degree in cybersecurity. This last quarter for one of my classes, I was tasked to examine and recreate an exploit. For the actual exploit I was examining the "anyone can spend" segwit addresses on the BCH chain, and in my research I found a $600k theft that seems to have gone completely unnoticed.
You all might recall this $600k theft of segwit addresses, but it happened again in mid-February 2018 and there has been zero news about it.
BCH block 517171 contains solely segwit-stealing transactions. If you look at any given transaction, the inputs are all segwit program hashes spending a P2SH segwit output. I only caught it by accident, as I was originally going to talk about the publicized November attack.
The interesting thing I discovered about this was that it's harder to have stolen that segwit money than most people think. Both Unlimited and ABC nodes do not relay segwit-spending transactions, and Bitcoin ABC hard-coded in fRequireStandard, so you couldn't even force-relay them with a conf option. On top of that, miners keep their node IPs private for obvious avoiding-ddos-and-sybil-attack reasons, which means it's impossible to directly send transactions to miners. This means that the only way to actually execute this attack was to setup one's own mining pool running on a custom-modified client to allow non-standard transactions. Then you'd have to get enough hash power to mine a block yourself. I estimated the cost of renting enough hash power to do this at the time as around $30k-$60k to have a greater than 90% chance of mining a block within a 3 month window.
In order to simulate the attack, I spun up BTC, LTC, and BCH nodes in Docker, and wrote a Python script. The Python script started at segwit activation on BTC and LTC and it scanned every transaction in every block looking for P2SH segwit inputs as well as native segwit outputs, since these are the necessary hash pre-images to spend P2SH segwit money on the BCH chain. The script then also scanned the BCH chain for any native segwit outputs, as well as recording all P2SH outputs. (This was all saved in a MySQL database.) Then, at any point in time, I could simply query for BCH unspent native segwit outputs as well as P2SH outputs for which I had a known segwit hash pre-image. (If this was an attack I was doing real-time, I would probably also have a large mempool on each node and monitor unconfirmed tx's for useful info as well, but since this was after the fact, I just queried blocks sequentially.)
For the mining node that runs the pool, it would need to be firewalled behind (i.e. only connected to) an unmodified node in blocks-only mode, so that the segwit hash pre-images aren't transmitted out to the network, and so that no other unconfirmed transactions are transmitted in to the mining node. (The mining node should only be filling its block with segwit tx's in order to maximize the gain from the attack.)
Then a script should run continuously to grab segwit utxos from the MySQL database and construct high-fee transactions to send directly to the mining node. Unlike the November attack, each input should be spent in its own individual transaction, so that in the event it is individually spent, I don't negate a tx with other inputs. The overhead on having different transactions for each input is only about 8 extra bytes (the tx version and the locktime), so I think this is a good trade-off.
Then, the attacker simply rents hashing power and points it at his secret pool.
By the time February rolled around and the attack happened, my MySQL database had about 40 million BCH P2SH outputs and each query took about 3 minutes to execute. This of course would have been fine in the 10-minute block world of Bitcoin and BCH, but it means that I stopped my Python script after that time, so I don't know about any possible other attacks that happened before the clean stack rule was hard-forked into BCH.
It was pretty interesting to work through how this attack must have happened, and it was significantly harder to execute than I thought it would be given that all the money was "anyone can spend".
However, the most interesting thing about all this is that nobody has noticed. There is literally no news or mention of block 517171 or any of the transactions in it. My theory is that it is money that nobody misses -- i.e. misprogrammed custom wallet software for BTC nodes accidentally also sent out BCH transactions to the same address, given that BTC and BCH shared the same history until August 2017. And whatever person or entity is running those nodes is only thinking about BTC money and is completely oblivious to its misprogrammed problem of shipping BCH to segwit P2SH addresses.
Obviously, that's just a theory, but I think it's pretty reasonable. Given the intense community divide, I think it's very possible that a number of BTC users simply ignored money on the BCH chain, even though it's "free money" for them, simply out of ideological hatred.
Whatever the case, nobody has posted anywhere complaining of money stolen in that block. It seems to have gone completely unnoticed. (Which is why I'm posting this.) It was an interesting case study and I'd be curious to hear if anybody has any addition information or thoughts about it. I believe this was a different person than the November theft, because the way it was done was different -- the November theft had all the money in one transaction, but this February theft was done with separate individual transactions. Additionally worth noting is that the address which received the bulk of the money is still active, which means they're still out there.
Anyway, I thought this was interesting and worth posting.
submitted by exmachinalibertas to btc [link] [comments]

Bitcoin core configuration in Windows

I've installed Bitcoin Core on Windows with the installer. I don't know how to increase the number of connections. Currently, it's always 8.
Several sources on the internet claim that custom configuration belong to a bitcoin.conf in the AppData/Bitcoin directory. But that doesn't work for me. I tried. In fact, I found out that the configuration including the datadir is currently contained in the registry. Not a single source I could found tells me that the registry contains these config values, so I'm kinda bummed out by this.
In any case, does that mean that I have to add a config value in the registry? And if so, how? The config names are different, namely, the registry config names are in camel case, while the names in bitcoin.conf are like "maxconnections=150". Help!
Edit: I consider the possibility that using the bitcoin.conf actually works and I made a mistake.
Edit2: Only 8 outgoing connections are possible (without addnode), so I opened the firewall as suggested.
Edit3: I finally get incoming connections. It's still slow but I'm optimistic that the speed will increase. It almost feels like synching an Ethereum node ffs.
Edit4: After having had 16 peers at some point yesterday, I'm back to 8 peers and no incoming connections. Speed is 1.3% per hour.
Edit5: I'm under the impression that I simply underestimated the size of the blockchain. I'm used to download huge files within minutes but 200gb is certainly something else. My bandwidth doesn't seem to be used to its full extent but it spikes up to the maximum throughput from time to time, so I guess this is the limiting factor after all. And some people want even larger blocks? F*** that.
submitted by HelloImRich to Bitcoin [link] [comments]

Bitcoin Core not closing (Do not shut down the computer until this window closes)

I tried to update my bitcoin.conf file yesterday and then tried to close bitcoin core and open it so that the changes would apply. (not sure if that was necessary or not.) Anyways I got the message "Do not shut down the computer until this window closes" and left it over night but it never closed. I read it might be related to rpc calls from lnd so I closed that and left it for another few hours and it still has not closed. I really don't want to have to re-sync the full chain again does anyone have any advice for me?
submitted by Bitcoin_Acolyte to Bitcoin [link] [comments]

Massive List of BSV Apps (please comment for new ones or updates/errors etc...)

🔗 means app lives on-chain. i.e. the app/content is hosted on the blockchain, something we take great pride in with BSV.

Block Explorers

Communities

Content

Exchanges

Financial Services

Gaming & Entertainment

News

Onchain Storage

Search Engines

Merchants & Services

Freeview Video / Radio / Podcasts

Tried to list prominent channels, open to all ideas but don't want channels with 3 subscribers and 2 videos. Show your Proof of Work!

Streamanity Video Channels

TODO. Think it is important to separate Freeview (Youtube etc..) from Streaminity, for new people to the space who don't have BSV.

Wallets

Credit: For initial list http://agora.icu and some jim-btc webscraping ;) Pastebin here (to easily reply to any reddit post about lack of apps): https://pastebin.com/qyzf8z2c
submitted by jim-btc to bitcoincashSV [link] [comments]

All Usernames

Popularity Number Tried Usernames
1 root
2 admin
3 guest
4 supervisor
5 Administrator
6 user
7 tech
8 ubnt
9 default
10 support
11 service
12 888888
13 admin1
14 mother
15 666666
16 test
17 oracle
18 ftpuser
19 usuario
20 test1
21 test2
22 123456
23 test123
24 123
25 321
26 password
27 [email protected]
28 postgres
29 dev
30 testuser
31 tomcat
32 git
33 dspace
34 nexus
35 zabbix
36 teamspeak
37 ftpuser1
38 ubuntu
39 ts3
40 www-data
41 ldapuser1
42 minecraft
43 ghost
44 butter
45 redis
46 ts
47 teamspeak3
48 hadoop
49 tonyeadmin
50 pi
51 odoo
52 mysql
53 contador
54 cron
55 wp
56 ftp
57 weblogic
58 backup
59 ftp_user
60 ts3bot
61 1234
62 bin
63 student
64 user1
65 tom
66 ts3server
67 nagios
68 duni
69 test321
70 e8ehome
71 telecomadmin
72 db2fenc1
73 bitcoin
74 a
75 deploy
76 nginx
77 db2inst1
78 hdfs
79 abc123
80 jenkins
81 web1
82 dasusr1
83 operator
84 anonymous
85 csgo
86 camera
87 passw0rd
88 baikal
89 tplink
90 cssserver
91 tt
92 admins
93 tst
94 osmc
95 prueba
96 fulgercsmode123
97 y
98 odoo9
99 zookeeper
100 mahdi
101 wordpress
102 www
103 billing
104 111111
105 ftp_test
106 flw
107 b
108 redhat
109 steam
110 ohh
111 ops
112 abc123456
113 user8
114 ScryptingTh3cod3r~F
115 ts3user
116 centos
117 svn
118 user9
119 postgres123
120 vagrant
121 gituser
122 enable
123 elastic
124 user2
125 daemon
126 user3
127 walter
128 VM
129 havanaloca
130 csgoserver
131 demo
132 CUAdmin
133 servercsgo
134 css
135 spark
136 ftptest
137 data
138 localadmin
139 wangjc
140 ispadmin
141 1
142 adam
143 Accept-Language: zh-CN,zh;q=0.8
144 web
145 client
146 xuelp123
147 workpress
148 openssh-portable-com
149 cacti
150 zs
151 cubie
152 informix
153 Contact:
154 conf
155 hbase
156 ranger
157 msn
158 bot
159 spark1
160 radio
161 xc3511
162 pass
163 dev123
164 maven-assest
165 noah
166 linktechs
167 query
168 bot1
169 informix123
170 gzw
171 tss
172 NETBASE
173 es
174 oracle123
175 user123
176 mcserver
177 ftpadmin
178 linuxshell
179 app
180 optiproerp
181 wangshaojie
182 knox
183 org
184 nmstest
185 elasearch
186 Xinjiang
187 aticara
188 555
189 [email protected]
190 wwwdata
191 sh
192 jenkins123
193 henry
194 licongcong
195 crontab
196 oldbody
197 tez
198 122.152.213.96
199 zhang
200 Shaanxi
201 nobody
202 cf46e3bdb4b929f1
203 ethereum
204 aa
205 Jay123
206 ionhasbeenidle13hr
207 mysql-data
208 system
209 localhost
210 [email protected]
211 dzldblog
212 linuxprobe
213 bdos
214 raid
215 jira
216 zhouh
217 amx
218 wanjm
219 MPE
220 aaa
221 NISECTC5002
222 ec2-user
223 sandiego
224 iptv
225 shell
226 confluence
227 matthew
228 bizf
229 backupdb
230 hive
231 dell
232 tornado
233 zhou
234 blender
235 user0
236 c
237 @Huawei123
238 net
239 cat1
240 watch 'sh'
241 haohuoyanxuan
242 administrador
243 text
244 dell123
245 wybiftp
246 share
247 yanss
248 squid
249 kafka
250 db2as
251 PRODDTA
252 bitcoinj
253 user01
254 cc
255 [email protected]
256 12345
257 azureadmin
258 duanhw
259
260 zhangfei
261 easton
262 geoeast
263 lwx
264 ldd
265 aws
266 gv1
267 140.115.53.10
268 useradmin
269 tlah
270 walletjs
271 ccc
272 user4
273 solr
274 chef
275 python
276 GET / HTTP/1.0
277 12345678
278 customer
279 sss
280 geminiblue
281 ausftp
282 Chongqing
283 nologin
284 username
285 mining
286 user11
287 news
288 2
289 muiehack9999
290 user5
291 ubuntu123
292 docker
293 nexxadmin
294 wq
295 OPTIONS / HTTP/1.0
296 gpadmin
297 test5
298 kuangwh
299 nagios123
300 ams
301 gfs1
302 vsb_pgsql
303 140.238.189.155
304 carl
305 CONNECT ip.ws.126.net:443 HTTP/1.1
306 nvidia
307 wallet
308 [email protected]
309 3
310 db2fenc1123
311 user6
312 www1
313 andy
314 assest
315 OPTIONS / RTSP/1.0
316 azure
317 webftp
318 tab3
319 aliyun
320 smartworldmss
321 hcat
322 walle
323 zhangfeng
324 openlgtv
325 User-Agent: Go-http-client/1.1
326 wangw
327 kelly
328 usuario1
329 [email protected]#
330 x
331 Huawei1234
332 user7
333 sysadmin
334 video
335 tmp
336 GET /nice%20ports%2C/Tri%6Eity.txt%2ebak HTTP/1.0
337 dianzhong
338 clfs
339 wangk123
340 rsync
341 livy
342 xuezw
343 hduser
344 testing
345 HEAD http://123.125.114.144/ HTTP/1.1
346 bitcoind
347 matrix
348 cassandra
349 xx
350 F
351 backups
352 ktuser
353 barbara
354 sunxinming
355 OPTIONS sip:nm SIP/2.0
356 ftpuser123
357 michael
358 jiang
359 wangh
360 wolf
361 ikan
362 122.88.49.75
363 monitor
364 Proxy-Authorization: Basic Og==
365 pentaho
366 rootadmin123
367 wildfly
368 xxx
369 nobodymuiefazan123456
370
371 www2
372 serial#
373 From: ;tag=root
374 cat2
375 alice
376 robot
377 wowza
378 visitor
379 tab2
380 elasticsearch
381 gbase
382 motorola
383 superuser
384 User-Agent: Mozilla/5.01688858 Mozilla/5.0 (Windows NT 6.1; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/62.0.3202.75 Safari/537.36
385 sara
386 Jaydell123
387 linuxacademy
388 vps
389 xbmc
390 software
391 Call-ID: 50000
392 felix
393 portal
394 backupdb140
395 bdos123
396 greenplum
397 sshd
398 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,/;q=0.8
399 daemond
400 qwe123
401 webmaster
402 [email protected]#
403 web13
404 bpadmin
405 ligh
406 leo
407 Max-Forwards: 70
408 password123
409 vivacom
410 dbvisa
411 tab
412 mongo
413 ggg
submitted by Admir4l88 to Admir4l88Data [link] [comments]

Bitcoin Verde v1.1.0 : Schnorr Signatures

For those unacquainted:
Bitcoin Verde is an indexing full-node, written from the ground up in Java. Bitcoin Verde comes with a block explorer, and a stratum mining pool. While we consider v1.1.0 still a beta release, our public node (https://bitcoinverde.org) has been stable since January.
Bitcoin Verde is the first to write a Schnorr Signature verification algorithm for Java (using Pieter Wuille's specification) ; if others implementations or wallets need to use our implementation as a reference, it can be located here. Verde's Schnorr implementation has been tested against the same suite of tests as ABC's (Test file located here). We intend to submit a pull request to Bouncy Castle sometime in the future.
Things that are new this release:
Similar to our previous release, Bitcoin Verde is very likely incompatible with Windows. Furthermore, it's an indexing node, and because of that will have more system requirements than a traditional node due to database indexes and the inherent underlying database structure. Our fully synced bitcoinverde.org node is currently using 615G disk space, and 21G of memory. Bitcoin Verde can be configured to run with far less memory, with a minimum around 2G. (Disable UTXO caching, disable TX Bloom Filter, set max database memory to ~1.5G). We highly recommend running BV on an SSD or M2. Traditional HDD drives are awful at random reads, and the last attempted initial-block-download we performed on an HDD took about 2+ weeks to complete.
If you have any problems with your node, please reach out to us at [email protected]. We'd be happy to help and troubleshoot problems. Alternatively, you can report bugs or issues to our github.
We've been diligently working on a mobile wallet based on the Bitcoin Verde codebase. We hope to provide a more modern replacement for bitcoinj, while also supporting SLP tokens. We are also ensuring all Bitcoin Verde SPV code can be transpiled to Objective-C (with Swift Bindings) for use on iOS. Finally, Bitcoin Verde is experimenting with a new message to improve the initial synchronization of SPV wallets called addrblocks, which will greatly improve the ability to validate SLP tokens. Additionally/alternatively, we have been looking at supporting BIP-157 for a more privacy-oriented way to achieve near-instant SPV synchronization; we look forward to sharing these thoughts in the near future.
Again, thank you to the XT team for your support. Another thank you for the ABC team for welcoming us into your conversations, and for helping us understand some of the nuanced aspects of this HF.
To install/upgrade your nodes, clone/pull master at https://github.com/softwareverde/bitcoin-verde, and reference the README under Installing/Upgrading.
submitted by FerriestaPatronum to btc [link] [comments]

Guide: How to run a full node on Windows when you have monthly bandwidth limits

I only get 200gb a month with my current ISP package, and so abandoned any hope of ever running a full node. But it turns out that my ISP doesn't count my usage during certain off-peak hours (in my case between 2:00 am and 8:00 am). Also upload bandwidth isn't counted at all during any time. So I did a little research and would like to share what I came up with to all of you out there with a similar predicament.
1) Check your usage page on your ISPs website
It was only after looking at my current usage gauge that it was explained when and what actually counts towards my bandwidth limit. To my surprise, they stop counts between the wee hours of the night (which makes sense).
2) If you indeed have 'off-peak' allowances, download Bitcoin Core
Make sure it's version 0.15 or higher.
3) Open up port 8333
I'm sure many of you know how to port-forward. If not, google those words along with your router model and there should be explanations readily available.
4) Give bitcoin-qt a test run and verify that you're visible to everyone
Start downloading the first bit of 2009 blocks just to be sure everything will run fine later that night. While you're doing this, it's a good idea to make sure your node is visible by testing it here.
5) Run Windows Task Scheduler and set bitcoin to run at the beginning of your off-peak hours
It was my first time using the Task Scheduler, but it was pretty intuitive to use for this basic use. You want to set up the basic task of running bitcoin-qt.exe at (e.g. 2:00 am) and choosing to repeat this task every 1 day. If you aren't going to be awake when your off-peak hours end, you may want to set the advanced setting of "Stopping this task if it runs longer than 4-8 hours". I realize that ideally you want to run your node for 6+ hours, but you can change this once you've downloaded the initial blockchain.
And that's how to do it! I'll be trying this for the first time tonight and hope to become one of a minority of nodes run in Canada, even though I'll likely only be verifying transactions on the other side of the globe.
Comments on how to improve this method are welcome.
submitted by sinn98 to Bitcoin [link] [comments]

Vendor Using BitPay Becomes Victim of Five Bitcoin Double-spend Attacks

Vendor Using BitPay Becomes Victim of Five Bitcoin Double-spend Attacks submitted by fearofhellz to btc [link] [comments]

Help Troubleshooting Bitcoin Code Full Node

Hi guys, I'm having a problem running my Bitcoin Core full node. If anyone can help me that would be amazing. I'll try my best to give all the details.
2017-11-05 11:50:54 Bitcoin version v0.15.0.1
2017-11-05 11:50:54 InitParameterInteraction: parameter interaction: -whitelistforcerelay=1 -> setting -whitelistrelay=1
2017-11-05 11:50:54 Assuming ancestors of block 0000000000000000003b9ce759c2a087d52abc4266f8f4ebd6d768b89defa50a have valid signatures.
2017-11-05 11:50:54 Using the 'standard' SHA256 implementation
2017-11-05 11:50:54 Using RdRand as an additional entropy source
2017-11-05 11:50:54 Default data directory /home/darius/.bitcoin
2017-11-05 11:50:54 Using data directory
2017-11-05 11:50:54 Using config file bitcoin.conf
2017-11-05 11:50:54 Using at most 125 automatic connections (1024 file descriptors available)
2017-11-05 11:50:54 Using 16 MiB out of 32/2 requested for signature cache, able to store 524288 elements
2017-11-05 11:50:54 Using 16 MiB out of 32/2 requested for script execution cache, able to store 524288 elements
2017-11-05 11:50:54 Using 4 threads for script verification
2017-11-05 11:50:54 scheduler thread start
2017-11-05 11:50:54 libevent: getaddrinfo: address family for nodename not supported
2017-11-05 11:50:54 Binding RPC on address ::1 port 8332 failed.
2017-11-05 11:50:54 HTTP: creating work queue of depth 16
2017-11-05 11:50:54 Config options rpcuser and rpcpassword will soon be deprecated. Locally-run instances may remove rpcuser to use cookie-based auth, or may be replaced with rpcauth. Please see share/rpcuser for rpcauth auth generation.
2017-11-05 11:50:54 HTTP: starting 4 worker threads
2017-11-05 11:50:54 init message: Verifying wallet(s)...
2017-11-05 11:50:54 Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010)
2017-11-05 11:50:54 Using wallet wallet.dat
2017-11-05 11:50:54 CDBEnv::Open: LogDir=database ErrorFile=db.log
2017-11-05 11:50:54 Cache configuration:
2017-11-05 11:50:54 * Using 56.2MiB for block index database
2017-11-05 11:50:54 * Using 8.0MiB for chain state database
2017-11-05 11:50:54 * Using 385.8MiB for in-memory UTXO set (plus up to 286.1MiB of unused mempool space)
2017-11-05 11:50:54 init message: Loading block index...
2017-11-05 11:50:54 Opening LevelDB in blocks/index
2017-11-05 11:50:54 IO error: blocks/index/LOCK: Permission denied
2017-11-05 11:50:54 Database I/O error
2017-11-05 11:50:54 : Error opening block database.
Please restart with -reindex or -reindex-chainstate to recover.
: Error opening block database.
Please restart with -reindex or -reindex-chainstate to recover.
2017-11-05 11:50:54 Aborted block database rebuild. Exiting.
2017-11-05 11:50:54 scheduler thread interrupt
2017-11-05 11:50:54 Shutdown: In progress...
2017-11-05 11:50:54 Shutdown: done
submitted by KomodoDragonJesus to Bitcoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Could not connect to Bitcoin Core using JSON-RPC error message when launching Eclair

Hi! I am new to the Lightning Network and I am seeking to install a Lighting Network full node on my PC.

I already have Bitcoin Core installed and my full bitcoin node working (version 0.17.1).

I went through some steps to install the LN full node on a video on YouTube, following instructions from a Medium post: "How to run a Lightning Network node on Windows" (https://medium.com/coinmonks/guide-setup-a-lightning-network-node-on-windows-8475206807f).

I installed Eclair (v0.2-beta9) from their Github page.

But when I try to launch Eclair (with my Bitcoin Core node up and running), an error message pops us, saying:
Could not connect to Bitcoin Core using JSON-RPC.
Make sure that Bitcoin Core is up and running and RPC parameters are correct.

Here is what I have in my Bitcoin Core .conf file:

testnet=0
server=1
rpcuser=foo
rpcpassword=bar
txindex=1
zmqpubrawblock=tcp://127.0.0.1:29000
zmqpubrawtx=tcp://127.0.0.1:29000
addresstype=p2sh-segwit
deprecatedrpc=signrawtransaction

And in my eclair.conf file:

eclair.chain=mainnet
eclair.bitcoind.rpcport=8332
eclair.bitcoind.rpcuser=foo
eclair.bitcoind.rpcpassword=bar
eclair.node-alias=”myalias”
eclair.node-color=ff9900

By the way, I went through an old thread on the same topic (https://www.reddit.com/lightningnetwork/comments/7rlk1e/could_not_connect_to_bitcoind_using_jsonrpc_any/), but the solutions proposed did not work for me.

Your help would be greatly appreciated :-) Thanks!
submitted by swisscrypto77 to lightningnetwork [link] [comments]

Help with windows installation

I am trying to install joinmarket on a windows 10 pc. I'm not very experienced in using programs that do not install themselves. I have tried to follow the detailed wiki for windows installation but I am having some problems. Hopefully someone can point out where I am going wrong. This is what I have done so far.
Installed JoinMarket - Appears to have gone well.
Installed Python - Appears to have gone well. I was able to run it from cmd.exe.
Install libsecp256k1 - I had to install MinGW. I did that and then installed the 4 items listed in Basic Setup and the one from All Packages. I was not sure if I needed just one or all, so I did them all. After this I did find the libgcc_s_dw2-1.dll. I put a copy of it in the joinmarket directory. I then put in python from the command prompt and saw the >>>. I typed in "import secp256k1" but I still got the error message. Not sure what I did wrong but I went on.
I then decided to see if I could do step 5, intsall the dll for libnacl. I downloaded the file as recommended and unzipped it. I then copied libsodium.dll from the correct directory and pasted it in the joinmarket directory. I then installed the x86 visual C++ 2013 from the link provided. I am not sure if I did the next step right. I open the file "wallet-tool.py" It opens a box labeled python.exe for a second and then closes. I assume this should not be happening.
Any suggestions are appreciated.
submitted by dancanthe to joinmarket [link] [comments]

Importing Bitcoin Keys

Hello! I am attempting to import a large list of Bitcoin private keys into my wallet, but I haven't found many good resources online explaining the best way to do so. After a few hours of reading forums and such online, I decided to use Multibit Classic, which allows you to import large lists all at once. However, each time I try to import, Multibit freezes and stops working. I've let it wait for a week to make sure it wasn't simply processing and such, but it was still frozen and using no resources on my machine.
I was wondering if:
  1. I am doing this correctly, or if there is a better way to import a large list of private keys?
  2. Is there anything I can do to prevent Multibit from freezing, or speed up the import process?
I believe one of my issues is that a majority of the transactions in Multibit appear to be in small amounts, 1-2USD. I would assume this makes confirmation times longer, as there is a smaller miner's fee. Is there anyway to 'group' transactions to help speed confirmation?
Would greatly appreciate any guidance here, as I am very new to Bitcoin and there's not many good resources regarding importing private keys into a wallet.
Thanks!
submitted by Xilcho to BitcoinBeginners [link] [comments]

Groestlcoin June Development Update & Release!

Another Quarter, Another Release! The Groestlcoin production factory has been working overtime as always in order to deliver even more tech to push Groestlcoin mainstream when the time comes.
There have been many new fantastic wallets and exchanges added to Groestlcoins repertoire over the past 3 months so we will re-cap these before moving on to what is new today.

Recap

What's New

Re-forged: Groestlcoin Samourai

Groestlcoin Samourai is a wallet for the streets. A modern Groestlcoin wallet hand-forged to keep your transactions private, your identity masked, and your funds secure. Its main advantages are its extreme portability and is the most secure Groestlcoin mobile HD wallet.
We've built a wallet that Groestlcoin deserves. If you are looking for a wallet that Silicon Valley will never build, the regulators will never allow, and the VC's will never invest in, this is the perfect wallet for you.
![Groestlcoin Samourai Release Video](http://img.youtube.com/vi/i3WU8Tde8XQ/0.jpg)

Head over to the Groestlcoin Samourai Release Page here for the full release announcement.

New: GroestlImage

Groestlimage turns any file into a mnemonic phrase allowing users to generate Groestlcoin private keys and addresses based on the data URI of the provided file. A picture is worth a thousand Groestls.

Features:

Link

https://groestlcoin.org/groestlimage/

Source Code

https://github.com/Groestlcoin/groestlimage

New: Groestlcoin Core Config Generator

Groestlcoin Core Config Generator is a simple GUI to configure the groestlcoin.conf file – A developers dream tool!
Each configuration option is available via the user interface, grouped by what attributes they affect. For ease of getting started with a new configuration, a variety of preset "node classes" are available on the right-hand-side of the screen. Selecting a preset will load our recommended base configuration for a node fitting that description, at which point you can then tune the configuration at the single option level.

Features

Link

https://config.groestlcoin.org/

Source Code

https://github.com/Groestlcoin/groestlcoin-core-config-generator

New: Groestlcoin Dumb Block Explorer

Dumb Block Explorer is a trivial block explorer written in a single PHP file. Now everybody can run their own block explorer.

Features

Link

https://www.groestlcoin.org/explore

Source Code

https://github.com/Groestlcoin/dumb-block-explorer

New: Groestlcoin SMS Push TX

Groestlcoin Simple Push TX is a server to push Groestlcoin transactions via SMS. Now everybody can send new transactions via SMS if the Internet is not usable (i.e. blocked by government entities or becomes otherwise unavailable).

Features

Source Code

https://github.com/Groestlcoin/smspushtx

Update: Electrum-GRS 3.3.6

Electrum-GRS is Groestlcoins #1 thin-client for Windows, MacOS, Linux and Android, based on a client-server protocol. Supporting multi-sig wallets without the bloat of downloading the entire blockchain.

New Features (Universal)

New Features (Windows, MacOS, Linux)

New Features (Android)

Link

https://github.com/Groestlcoin/electrum-grs/releases/download
https://play.google.com/store/apps/details?id=org.groestlcoin.electrumgrs

Source Code

https://github.com/Groestlcoin/electrum-grs
submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Best Bitcoin Mining Software for PC 2020 Free Download No Fee + No Investment + Payment proof ONLINE BITCOIN GENERATOR WINDOWS BITCOIN GENERATOR ANDROID BITCOIN MINER FREE BITCOINS 2020 How to make money from home with bitcoin! Making money online is easy. Best Bitcoin Mining Software for PC 2020 - Mining 2 BTC In one day Best Bitcoin Mining Software That Work in 2020

By default, Bitcoin (or bitcoind) will look for a file named 'bitcoin.conf' in the bitcoin data directory, but both the data directory and the configuration file path may be changed using the -datadir and -conf command-line arguments. Bitcoin Core GUI. Press the Windows key (⊞ Win) and start typing “bitcoin”. When the Bitcoin Core icon appears (as shown below), click on it. To enable block pruning set prune=N on the command line or in bitcoin.conf, where N is the number of MiB to allot for raw block and undo data. The first step is finding the default data directory. Mac, Windows, and Linux version of Bitcoin Core each store data in a different location. The procedure described here will use a graphical file browser to find it. On Windows 7, begin by clicking on the Windows menu. Then click your username from the right-hand menu. A new document about the bitcoin.conf file describes how to use it to configure Bitcoin Core. A new document introduces Bitcoin Core’s BIP174 Partially-Signed Bitcoin Transactions (PSBT) interface, which is used to allow multiple programs to collaboratively work to create, sign, and broadcast new transactions. By default, Bitcoin (or bitcoind) will look for a file named 'bitcoin.conf' in the bitcoin data directory, but both the data directory and the configuration file path may be changed using the -datadir and -conf command-line arguments.

[index] [2703] [11882] [10847] [4186] [13520] [6302] [8719] [1621] [3180] [4192]

Best Bitcoin Mining Software for PC 2020 Free Download No Fee + No Investment + Payment proof

Bitcoin miner pro is the premier Bitcoin Mining tool for Windows and is one of the easiest ways to start mining Bitcoins. ... or constantly editing configuration files. Bitcoin miner pro is the ... Bitcoin JSON-RPC tutorial. Set up your bitcoin.conf file and create custom settings with bitcoind. BTC: 1NPrfWgJfkANmd1jt88A141PjhiarT8d9U In the latest version of Bitcoinplus you shouldn't need to ever create a CONF File. However there may on occasions be a time when you will want to do so. This video will show you how. Great Bitcoin Miner PRO is the premier Bitcoin Mining tool for Windows and is one of the easiest ways to start mining Bitcoins. ... commands or constantly editing configuration files. Great ... Bitcoin Miner Machine is the premier Bitcoin Mining tool for Windows and is one of the easiest ways to start mining Bitcoins. ... commands or constantly editing configuration files. Bitcoin Miner ...